DESCRIPTION
HDPE high density polyethylene classified as a MRS 10.0 material (PE100) produced by the advanced Technology. Well dispersed carbon black gives outstanding UV resistance. Long term stability is ensured by an optimized stabilization system.
APPLICATIONS
It is recommended for pressure pipe systems in the applications field of drinking water and natural gas, pressure sewerage, relining, sea outfall and industrial. It is especially designed for the production of larger diameter, thick wall pipe, but can be processed for the whole range of diameters. It also shows excellent resistance to rapid crack propagation and slow crack growth.
PHYSICAL PROPERTY
| Property | Compound | unit | Typical Value |
|---|---|---|---|
| Density | Compound | kg/cubic meter | 960 |
| Melt Flow Rate | 190/5Ks | g/10 minutes | 0.25 |
| Tensile Modulus | 1mm/min | Mpa | 1100 |
| Tensile strength at Break | 50mm/min | % | >600 |
| Tensile stress at Yield | 50mm/min | Mpa | 25 |
| Carbon Black Content | % | >2 | |
| Carbon Black Dispersion | <3 | ||
| Oxidation Induction Time | 210 | minutes | >20 |
| Resistance to Rapid Crack | 0 degree | bar | >10 |
| Resistance to Slow Crack | 9.2bar, 80 degree | hours | >1000 |
Extrusion Die Barrel Temperatures.
190 degrees centigrade to 220 degrees centigrade.
Ask about this grade
Tell us what you need and we will come back to you with a plan.